Textile Factory

Mixing Factory

1200 INDUSTRIAL ROAD #3, SAN CARLOS, CA 94070Phone: (650) 591-1733Fax: (650) 591-4253

American Laundry Products acquires Clenacorp Effective January 1, 2017
IRONER CHEST LUBRICANTS & CLEANERS / Thermal & Gas Ironer Lubricants & Cleaners /

Clena High Temperature Lube

High Temperature Ironer Paste Lubricant With Anti-Static Agents (Heat Range 350°- 425°F)

Description

CLENA HIGH TEMP LUBE is a high temperature heat resistant lubricant for oil heated flatwork ironers

CLENA HIGH TEMP LUBE is designed to prevent buildup of alkali, starches and other accumulated residues on your flatwork ironer chests.

CLENA HIGH TEMP LUBE must be used on hot surfaces.

CLENA HIGH TEMP LUBE will not stain, carbonize, or form buildups on flatwork ironer chests.

CLENA HIGH TEMP LUBE is a paste that spreads and applies easily.

CLENA HIGH TEMP LUBE is odorless and contains WX-54 antistatic reducing compound.

CLENA HIGH TEMP LUBE can be used on thermal heated ironers or gas/electric cylinder type ironers where the temperature does not exceed 350°F.

CLENA HIGH TEMP LUBE should be used as a lubricant only.

CLENA HIGH TEMP LUBE is environmentally safe.

Directions

1. Spread 12 to 18 inches of CLENA HIGH TEMP LUBE across the width of a flannel applicator cloth, making sure cloth is saturated with CLENA HIGH TEMP LUBE.

2. Fold in half and run through your flatowrk ironer at a slow speed.

3. Open and rerun a second time.

4. Once a week, recoat CLENA HIGH TEMP LUBE

5. Regular use of CLENA HIGH TEMP LUBE will reduce ironovers, prevent rolling and increase ironer efficiency.

Warnings

TREATMENT CLOTHS, when not in use, should be stored in a closed steel container to offset possibility of spontaneous combustion. This is the same precaution required for any paint, oil, grease or wax saturated fabric in industry as well as home use.

Packaging

Available in:

40 pound pails

400 pound drums

Notes

Establish a maintenance program of cleaning and waxing regularly with CLENA PRODUCTS. A Clean chest with proper lubrication will increase ironer efficiency.