Textile Factory

Mixing Factory

1200 INDUSTRIAL ROAD #3, SAN CARLOS, CA 94070Phone: (650) 591-1733Fax: (650) 591-4253

American Laundry Products acquires Clenacorp Effective January 1, 2017
IRONER CHEST LUBRICANTS & CLEANERS / Steam Ironer Lubricants & Cleaners /

Clena Cote

Flatwork Ironer Lubricant

Description

CLENA COTE is a heat resistant lubricant in paste form.

CLENA COTE is designed to prevent buildup of alkali, starches and other accumulated residues on your flatwork ironers.

CLENA COTE must be used on hot surfaces.

CLENA COTE will not stain, will not carbonize, or form buildups on flatwork ironer chests.

CLENA COTE is paste that spreads and applies easily.

CLENA COTE is odorless, and maintains full coating film on covers and chests.

Regular use of CLENA COTE will reduce ironovers, prevent and increase ironer

efficiency.

CLENA COTE is environmentally safe.

Directions

1. Spread 12 to 18 inches of CLENA COTE across the width of a flannel applicator cloth, making sure cloth is saturated with CLENA COTE.

2. Fold in half and run through your flatwork ironer at a slow speed.

3. Open and rerun a second time.

4. Once a week, recoat applicator cloth with CLENA COTE.

Warnings

TREATMENT CLOTHS When not in use, should be stored in a closed steel container to offset possibility of spontaneous combustion. This is the same precaution required for any paint, oil, grease, or wax saturated fabric in industry as well as home use.

Packaging

35 pound pails

400 pound drums

Notes

Establish a maintenance program of cleaning and waxing regularly with CLENA PRODUCTS. A clean chest with proper lubrication will increase ironer efficiency