Textile Factory

Mixing Factory

1200 INDUSTRIAL ROAD #3, SAN CARLOS, CA 94070Phone: (650) 591-1733Fax: (650) 591-4253

American Laundry Products acquires Clenacorp Effective January 1, 2017
IRONER CHEST LUBRICANTS & CLEANERS / Steam Ironer Lubricants & Cleaners /

Clena Combo

Premium Combination Cleaner and Lubricant With Anti-Static Agents

Description

CLENA COMBO is a combination of cleaners and heat resistant lubricants and waxes in paste form.

CLENA COMBO is designed to clean the alkali, starches and other accumulated residues from your flatwork ironers.

CLENA COMBO must be used on hot surfaces.

CLENA COMBO is a pure white paste that spreads and applies easily.

CLENA COMBO is odorless and contains WX-54 antistatic reducing compound.

CLENA COMBO is environmentally safe.

Directions

1. Spread 12 to 18 inches of CLENA COMBO across the width of a sheet.

2. Fold in half and run through your flatwork ironer at a slow speed close to the right side. Open and rerun sheet at a single thickness.

3. Repeat with a second treated sheet and run through the left side. Open and rerun sheet at a single thickness.

4. Run enough damp sheets through your flatwork ironer to remove unwanted residues that have been cleaned and released by CLENA COMBO.

5. In the event of excessively dirty chests, it might be necessary to repeat additional times.

6. If ironer covers are extremely dry, it might be necessary to use CLENA COMBO a lubricant, to maintain efficiency.

Warnings

WARNING TREATMENT CLOTHS, when not use, should be stored in a closed steel container to offset possibility of spontaneous combustion. This is the same precaution required for any paint, oil, grease, or wax saturated fabric in industry as well as home use.

Packaging

Available in:

40 pound pails

400 pound drums

Notes

Establish a maintenance program of cleaning and waxing regularly with CLENA PRODUCTS. A Clean chest with proper lubrication will increase ironer efficiency.